-40%

Tegam/PPM R1L-E Portable Ohmmeter/Milliohm Meter 1 micro-Ohm to 20 Ohms w/Probes

$ 659.99

Availability: 100 in stock
  • Model: R1L-E
  • MPN: R1L-E
  • Brand: PPM/Tegam
  • Ohmmeter Type: Ohmmeter
  • Condition: This unit ships fully tested and guaranteed to work for 30-days, parts and labor, excluding freight.
  • Resistance Range: 2 mOhms to 20 Ohms
  • All returns accepted: ReturnsNotAccepted

    Description

    Tegam/PPM R1L-E Portable Ohmmeter/Milliohm Meter with HTP-100 Probes
    Comes with a manual and what you see in the pictures. If you don't see it, you probably won't get it.
    Specifications are from Tegam/PPM and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
    This unit ships fully tested and guaranteed to work for 30-days, parts and labor, excluding freight.
    The Unit's Information Reads:
    Model Number:
    R1L-E
    Serial Number:
    0318116
    Description:
    The Model R1L-E is a portable ohmmeter designed to measure low values of resistance, from one micro-ohm to 20 ohms. Four point measurements are utilized in order to eliminate any errors caused by the resistance of the leads. Two leads are used to pass a regulated constant DC current through the resistance under test, and two separate leads are used to measure the resulting voltage drop accross this resistance. By use of Ohm's Law (Voltage = Current X Resistance), the resistance is automatically calculated and displayed digitally.
    The current is well regulated and is constant despite large changes in the unknown resistance and/or the resistance of the connecting leads. If the series resistance is higher than the selected range, the display shows a "1" follow by three blanks.
    Specifications:
    Range:
    Ohms
    Full Scale:
    Resolution:
    Test Current:
    1
    0.001999
    1 micro-ohm
    1.5 Amps
    2
    0.01999
    10 micro-ohms
    150 mA
    3
    0.1999
    100 micro-ohms
    15 mA
    4
    1.999
    1 milliohm
    1.5 mA
    5
    19.99
    10 milliohms
    0.15 mA
    Accuracy:
    ±0.1% of reading ± one count on all ranges.
    Dimensions:
    17.5" W x 11.5" D x 7" H.
    Weight:
    13 lbs. (with probes).
    Power Requirements:
    Power is from three alkaline D-cells, rated at 15,000 mA-hours each, series-connected. Nominal voltage is 1.5 V each, totalling 4.5 V. Current drain varies with range, and with actual useage, but is typically less than 150 mA, providing typically at least 80 hours of operation.
    Operating Temperature Range:
    0°C to +50°C
    Storage Temperature Range:
    -40°C to +71°C.
    Relative Humidity Range:
    0 to 100%, non-condensing.
    For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
    Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
    (1) Are you the end-user of this item?
    (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
    (3) What is the ultimate country destination?
    07/15/20