SHARS 87 PCS METRIC RECTANGULAR GAGE BLOCKS SET DIN861 GRADE 2 CERT NEW L}

Description

SHARS 87 METRIC RECTANGULAR GAGE BLOCKS SET DIN861 GRADE 2 With Manufacturer CERTIFICATE NEW
Product Code
303-5315
Product description
9 blocks 1.001mm to 1.009mm in step 0.001mm
49 blocks 1.01mm to 1.49mm in step 0.01mm
20 blocks 0.50mm to 20.0mm in step 0.50mm
9 Blocks 20.0mm to 100 mm in step 10.0mm
87 Pieces
Product application
The inspection certificate specifies the deviation of each individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. DIN 861 Grade 2 gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters
Product features
Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C)
Individual serial numbers on each block, regardless of grade.
All sets meet or exceed DIN861 Grade 2 standard
DIN861 Grade 2 standard with manufacturer certificate,Each gage block set have serial numbers, tollerances, and a certificate of calibration
Mirror polished surfaces provide superior wringing characteristics.
Guaranteed Accuracy of Flatness, Squareness, and Parallelism .
Excellent Finish and Wringing Characteristics.
Professional treated gauge block wooden index box.
Technically, the wood must be specially treated for better anti-rusty protection of the gauge blocks and the box will not be deformed. Our wood material is treated in strict conditions boiling in anti-rusty oil, therefore it will guarantee the gage blocks won't get wet or rusty.
All gage block sets are cleaned, reconditioned, and greased ready for shipment.
All sets are supplied in deluxe fitted wood case.
Grade and Application
Workshop use→Mounting tools and cutters→Grade AS-1 or AS-2
Workshop use→Manufacturing gages→Grade 0 or AS-1
Workshop use→Calibrating instruments→
Grade 0 or AS-1
Inspection use→Inspecting mechanical parts, tools, etc.→Grade 0 or AS-1
Inspection use→Checking the accuracy of gages→Grade 0
Inspection use→Calibrating instruments→Grade 0
Grade AS-1: These gage blocks are intended for shop floor use to set and calibrate fixtures as well as precision instruments.
Grade 0: This grade is used within an inspection area to verify the accuracy of plug and snap gages as well as for setting electronic measuring devices.
Product includes
Fitted case
Tolerance of DIN 861 Grade 2 same with JS Grade 2, please check below
Compare Chart of DIN861 & JIS B7506 Grade 2
Accuracy
Nominal Size (mm)
JS B7506 Grade 2
Tolerances in Microns (0.001mm)
DIN861
Grade 2 (0.001mm)
10 or Less
±
0.45
±
0.45
10-25
±
0.60
±
0.60
25-50
±
0.80
±
0.80
50-75
±
1.00
±
1.00
75-100
±
1.20
±
1.20
Grade 2
Steel
Rectangle
Inch Gage Block Set includes a set of
Rectangle
-shaped, high-carbon, high-chrome steel gage blocks with nominal length engraved in inches on each, and is supplied with a SHARS inspection certificate that states that the blocks meet German DIN 861
Grade2
standard for flatness, length, parallelism, and surface finish.
High-carbon, high-chrome steel has a high hardness for minimum deterioration, and is selected for its wear-resistance. These gage blocks have a
Rectangle
base for accurate wringing, to attain a height reference standard, and for the ability to make a dedicated inspection jig. The nominal length of each block is measured in metric(mm), and is indicated with laser-etched, black characters.
An identification number is laser-etched on each block for traceability. The set includes an inspection certificate that the blocks meets DIN 861 standard for flatness, length, parallelism, and surface finish.Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries.
They are commonly made of precision-ground steel, ceramic, or carbide material, and have a
Rectangle
or rectangular base. Each block has a unique identification number. Length is in inch or millimeter measurement.
Gage blocks can be wrung together to create a required length. Wringing is the process of lapping blocks together with a small amount of oil. They are standardized by grade, which refers to the tolerance or deviation of an individual block from its nominal length. Gage block grades are defined for flatness, length, parallelism and surface finish. Some grades of gage blocks meet standards such as ASME, Association for Iron and Steel (AIST), and International Organization for Standards (ISO). Application and required level of accuracy dictate which grade of gage block should be used.
Both a certificate of inspection and a calibration certificate specify the deviation from the nominal length.
We have other gage blocks available at
My Ebay Store
:
All Available to Ship NOW! at Fixed Prices
If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:
Email:
[email protected]
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a .00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs.
PAYMENT:
We accept VISA, MasterCard and E-Check on PayPal.com
Illinois resident adds 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at
[email protected]