New Tyco NVT NV-16PS10-PVD Power Supply Passive Receiver 16 Channel Power Suppl

Description

New
Tyco NVT NV-16PS10-PVD
Power Supply Passive Receiver
16 Channel Power Supply
Cable Integrator Hub
Descriptions :
The NVT model NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.
At the camera, Power, Video and Data connections are made using a PVD™ transceiver via an RJ45 connector and a single 4-pair cable. Control/MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Consolidated P/T/Z telemetry data, if required, passes through the NV-16PS10-PVD’s data path, and is connected to the controller via another 4-pair RJ45 cable.
Features
·
Provides Class 2 SELV camera power and pass-through video and telemetry data connectivity for up to 16 cameras, each via a single RJ45 4-pair UTP cable
·
Independently selectable 24 or 28VAC
·
Standard telecom / datacom  structured cabling pinouts per EIA/TIA 568B
·
Diagnostic LEDs show load/no load, miswires, and overload conditions
·
Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera
·
Power cameras via UTP over significant distances
·
Automatic-reset fault protection
·
Individually floating outputs ensure total ground-loop immunity
·
1 U high; 12” deep, wall, desk, or rack-mountable
Details :
The NV-16PS10-PVD from NVT is a Power Supply Cable Integrator Hub and is designed for installation in the wiring/IDF telecom closet. The NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pin outs. In NV-16PS10-PVD from NVT at the camera, Power, Video and Data connections are made using a PVD™ transceiver via an RJ45 connector and a single 4-pair cable. The Consolidated P/T/Z telemetry data passes through the NV-16PS10-PVD’s data path, and is connected to the controller via another 4-pair RJ45 cable and Control/MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras.
Note :
·
15-Day Warranty on all items
·
If the item is defected, the same one will be exchanged, no refund
·
Buyer outside the USA has to pay all
return shipping cost