AMT Pump 2855-95 Self-Priming Centrifugal Pump 1 HP, 1 Phase, 115/230 V, Curve D

Description

AMT Pump 2855-95 Self-Priming Centrifugal Pump 1 HP, 1 Phase, 115/230 V, Curve D
Self-cleaning semi-open impeller for use in circulating, boosting, wash down, liquid transfer, and dewatering applications
Built-in flapper/check valve permits self-priming to 20 feet
Cast iron with buna-n mechanical seal and O-ring
Maximum operating temperature 180 degrees F
1" and 1-1/4" female NPT suction port, 1" and 1-1/4" female NPT discharge port
This AMT self-priming centrifugal pump has a cast iron housing and 1" or 1-1/4" female NPT suction and discharge ports. The pump is self-priming to 20 vertical feet (after initial fill) with its built-in check valve, and its clog-resistant impeller handles semi-solids up to 3/8" diameter. The pump housing has buna-n mechanical seal and O-ring, a fill and drain plug for easy servicing, and a double volute chamber for reduced radial load on the impeller. The motor enclosure is either TEFC (totally enclosed, fan cooled) for protection from dust and indirect water spray or ODP (open, drip proof) for protection from dripping water, depending on the model, and complies with National Electrical Manufacturers Association (NEMA) 56J standard for mounting dimensions. This pump is suitable for use in applications such as circulating, boosting, wash down, liquid transfer, and dewatering. Specifications Motor 0.33 to 1.5 hp, ODP or TEFC Pump Centrifugal self-priming with dual volute Maximum flow rate Ranges from 50 to 82 gpm Impeller Stainless steel self-cleaning, semi-open Suction port 1" or 1-1/4" NPT Discharge port 1" or 1-1/4" NPT Maximum operating temperature 180 degrees F Maximum solids handling 3/8" Standards met NEMA 56J Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel. American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps.
Shipping
We offer FREE shipping on all orders!
We ship within Three business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.